Yueqing Moller Imp&Exp Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Yang Caleb
  • Company Name : Yueqing Moller Imp&Exp Co., Ltd.
  • Tel : 0086-577-62775526
  • Fax : 0086-577-62886950
  • Address : Zhejiang,Wenzhou,7th Floor,No.6, Huancheng East Road, Houjie Industrial Zone, Liushi Town, Yueqing City
  • Country/Region : China
  • Zip : 325604

High Quality metallized polypropylene(mpp) film power capacitor

High Quality metallized polypropylene(mpp) film power capacitor
Product Detailed
Related Categories:Capacitors
1.manufacturer of capacitor,controller,reactor etc, 2.approvel ISO9001,TUV, CE, UL, SGS, SEMKO, DEMKO,N,S,D,RoHS

1, small size, light weight: Due to metalized polypropylene membrane as medium, size, Weight is only the old product, 1 / 4 and 1 / 5. 2, low loss: less than 0.1% of actual value, so the capacitor's own low energy consumption, less heat Low temperature, long service life, good energy-saving effect. 3, excellent self-healing properties: over-voltage caused by the rapid self-healing breakdown of local media, recovery To normal work, so that greatly improved reliability. 4, Security: built-in self-discharge resistance and the device. On the capacitor can discharge resistance Let go of power with automatic vent; When the capacitor fails, the safety device in time to disconnect the power, To avoid the failure of further development, to ensure safe use. 5, no oil spill: The use of advanced semi-solid capacitor impregnant, drop melting point higher than 70 °C, Not leak during use to avoid environmental pollution, the capacitor will not result in loss of oil Failure. Main indicators Use conditions: ambient temperature -25 °C ~ +50 °C, humidity ≤ 85%, an altitude of 2000 meters. Rated voltage: 250VAC, 400VAC, 525VAC, 690VAC, 750VAC, 1050VAC. Rated capacity: 1 ~ 100kvar. Capacity tolerance: -5 ~ +10% Dissipation factor: rated voltage in the frequency, 20 °C when tgδ ≤ 0.1%. AC withstand voltage: 2.15 times rated voltage between poles 10 seconds, most shell between 3kV10 seconds. Maximum allowable over-voltage: 1.10 times rated voltage. Maximum allowable over-current: 1.30 multiples of the rated current. Self-discharge characteristics: plus 2 Un capacitor DC voltage, disconnect the power after three minutes, the remaining power Pressure down to 75V or less. Standard: GB12747-2004 IEC60831-1996

ModelBSMJBCMJBZMJRatedvoltagekVRatedoutputkvarTotalcapacitanceμFRatedcurrentADimensionsL × W × H(mm)
0.45-10-30.4510157.312.8167×57×180
0.45-12-30.4512188.715.4167×57×180
0.45-14-30.4514220.218.0167×57×210
0.45-15-30.4515236.019.2167×57×210
0.45-16-30.4516251.620.5167×57×210
0.45-20-30.4520314.525.7167×57×240
0.45-30-30.4530471.638.5167×85×250
0.45-40-30.4540628.851.3167×85×300270×120×210
0.45-50-30.4550786.064.2270×120×230
0.525-10-30.52510115.511.0167×57×180
0.525-12-30.52512138.713.2167×57×180
0.525-14-30.52514161.815.4167×57×210
0.525-15-30.52515173.316.5167×57×210
0.525-16-30.52516184.917.6167×57×210
0.525-20-30.52520231.122.0167×57×240
0.525-30-30.52530346.533.0167×85×250
0.525-40-30.52540426.044.0167×85×300270×120×210
0.525-50-30.52550577.455.0270×120×230

High Quality metallized polypropylene(mpp) film power capacitor



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.